Sewn buttons covered in fabric

Send

How to wrap fabric buttons

fabric-sewn sewing buttons, as a fastener, give the product an elegant look. not always such accessories can be purchased at the store. I propose to do it yourself.
we select the lining fabric in the color of your product. from experience, most preferably, plain 100% viscose.

cut a square out of the fabric, duplicate it with a thin glue. make a hole of suitable diameter with either a punch or use a peephole (if your machine supports this function of decorative stitches.

put a piece of fabric on the part of the button with the pin. and close the button completely from above.

cut off the excess tissue. the circle with a diameter should be such that the edges of the fabric converge in the center.

we sew small handmade stitches in a circle in two folds

then we pull the fabric onto the thread and go through small stitches for another 2 circles, tightly tightening the fabric. if viscose with the addition of polyethylene fibers is chosen for a tight fit, then with this operation the fabric will creep.

finish the manual stitches with a knot. remove part of the button with a pin. here is the finished half.

make markup for sewing buttons. take a pin with a large head and stick it in the center of the button, through all layers of fabric. holding the pin from the bottom with your hand, sew the button to the board according to the marking with secret stitches.
Buttons are more convenient to sew on one. First, one part of the button was sewn, then the second part was symmetrical to it.they fastened the button, checked for evenness and only then we proceed to sewing the next one.